X-Guard Connect
One to a maximum of 50 Bluetooth Alarm buttons can be linked to the X-Guard Connect at one fixed address in the Alarm Manager. Depending on the construction of the building, alarm buttons work up to a maximum of 25 meters from the X-Guard Connect.
The Bluetooth Alarm Button (which can be screwed to a surface) is often chosen as the alarm button. An address or location can be linked to this Alarm Button. This location is communicated when an emergency call is sent from that location.
Technical information
The connect is delivered configured and should be placed as centrally as possible in the room or building.
There must be a free 230 volt connection and fixed internet within one meter of the mounting point.
If a fixed internet line cannot be used, there must be a WiFi connection at the installation location that is not damped more than -70 dB.
- CONNECTIVITY: WiFi, Bluetooth 4.2, Flic Bluetooth Low Energy Protocol, Ethernet, 3,5mm audio in/out, 2,5mm IR output.
- COMPATIBILITY: X-Guard alarm buttons, iOS 10+ and Android 5+. For management and integration.
- RANGE: Up to a maximum of 30 meters depending on the building construction.
- MEASUREMENTS: 86mm x 66mm x 12.8mm
- MATERIALS: Matte white plastic
- CARE & CLEANING: Dust or clean with a damp cloth.
- WATER TIGHTNESS: IP40
- CURRENT: 900mA max & 250mA standby
The following connections are made by the X-Guard Connect:
- api.flic.io (port 443)
- flichub.s3.eu-west-2.amazonaws.com (port 80, 443)
- flic-firmware-flic-io.s3.amazonaws.com (port 443)
- connectivitycheck.gstatic.com (port 80)
Want to know more?
Would you like to know more about the X-Guard Alarm app, the Bluetooth Alarm Button or our techniques for accurate location determination? Click on one of the buttons below.
